Security Alarms AR6000 Guia do Utilizador descarregar pdf (Página 52)

52 SPEKTRUM DX6 • AIRCRAFT PROGRAMMING GUIDE

OFFSET

MIXING OFFSET ADJUSTMENT

The purpose of the mixing offset feature is to redeﬁne the neutral position of the slave channel to be mixed.

Any desired position may be selected for the offset reference point. To set the offset position, Place the master

channel’s stick to the desired position and press either the INCREASE or DECREASE keys.

This position is now stored in the memory and its offset value from the neutral position of the master channel is

indicated numerically on the LCD display.

Then, the mixing value at the determined offset position is now set at 0.

















ACCESSING THE OFFSET FUNCTION

1. Press the CHANNEL button once until Mix Offset appears in the center of the screen.

2. Place the master channel stick to the desired offset position, then press either the INCREASE or DECREASE

button to store the offset. The offset value will be displayed.

3. Press the SCROLL button once to access Program Mix B, press twice to access program MIX C, and a third

time for servo reversing.

4. To exit the Function mode, press the

SCROLL and INCREASE buttons simultaneously.

Note: If a mix switch position other than on has been selected, it will be necessary to move the

selected switch to the on or active position to set the offset value. “OF” will appear on the screen

if the selected mixing switch is in the off position.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 95 96

Sem comentários

Security Alarms AR6000 Guia do Utilizador Página 52