14
Important Gyro Information
Note: After flight trimming the helicopter, or anytime the rudder trim is changed, It is important
to rebind the system (see Binding page 60) to set the fail-safe position to the rudder’s true
neutral. With many types of gyros, each time the radio is turned on the gyro senses the servo
output position and establishes this as the center for that flight.
When the DX6 receiver is first turned on, the servos are driven to their fail-safe positions until the receiver
connects to the DX6 transmitter. This can take several seconds. If the fail-safe position for rudder is different
than the rudder trim position, it is possible that the gyro will establish the fail-safe position as neutral instead
of the trimmed neutral position. By making the rudder trim position and the fail-safe position the same, this
is prevented from happening. In summary, after the helicopter is trimmed rebind the system to prevent
the tail from drifting.
User Guide
This user guide is divided into two main sections: airplanes and helicopters. Blank data sheets are included at
the end of each section. Once you have input all the necessary data for a particular model, it is recommended
that you record that information on a data sheet. This insures that, in the rare case of a memory failure, you will
not lose the data.
Note: Data sheets are available online that allow you to input, store and print data sheets for
your convenience.
System Features
• Digital DSM™ Spread Spectrum Modulation
• 10-model memory
• Dual rates on aileron and elevator
• Exponential rates on aileron and elevator
• Dual and exponential rates can be combined on one switch
• Trainer system compatible with Spektrum™ and JR
®
radio systems.
• Adjustable stick length
• Throttle trim only affects idle position
• Two-speed scrolling
• Throttle-smart fail-safe system
• Digital trims for precise adjustment
Airplane Specific Features
• Aileron to rudder mixing
• Elevator-to-flap mixing
• Flap-to-elevator mixing
• Flaperon mixing
• Delta wing mixing
• Aileron differential
• V-tail mixing
• Three programmable mixes
SPEKTRUM DX6 • HELICOPTER QUICK START GUIDE
Comentários a estes Manuais