Security Alarms AR6000 Guia do Utilizador descarregar pdf (Página 47)

47SPEKTRUM DX6 • DX6 AIRCRAFT PROGRAMMING GUIDE

DIFFERENTIAL

Aileron differential is used to correct roll to yaw coupling and adverse yaw characteristics during rolling

maneuvers. In order to activate differential, the ﬂaperon or Delta wing type must be selected in the system mode

(see page 35). Also, each aileron control surface must have its own servo with the right aileron servo plugged

into the aileron channel (#2) on the receiver and the left aileron servo plugged into the Flap Aux 1 channel (#6)

on the receiver.











�







ACCESSING THE DIFFERENTIAL FUNCTION • FLAPERON/DELTA MODE ONLY

1. Turn on the transmitter.

2. Flaperon wing type must be selected (see page 33).

3. Press the SCROLL and INCREASE buttons simultaneously to enter the function mode.

4. Press the SCROLL button until “MIX DIF” appears on the screen.

5. Press the INCREASE or DECREASE button to adjust the differential mixing value.

6. Press the SCROLL button to access the ﬂap-to-elevator offset trim function.

7. To exit, press the SCROLL and INCREASE buttons simultaneously.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 95 96

Sem comentários

Security Alarms AR6000 Guia do Utilizador Página 47